Description
Practical value and everyday use
Original Mem Retain Brand 9 Volt Battery Powered OBD ll Connector Vehicle Memory Saver Reliable and Easy is listed in Code Readers & Scan Tools. For a practical buying decision, start with this source-backed point: Product identity: Original Mem Retain Brand 9 Volt Battery Powered OBD ll Connector Vehicle Memory Saver Reliable and Easy.
The source also records: A voltage-blocking diode installed for safe use prevents vehicle 12 volts from damaging the 9-volt battery. Power can only flow out of the battery not in. Use this additional stated detail to judge day-to-day usefulness and package value: Instructions are included for perfect results——- Uses 9 volt battery (Not Included).
Value-focused decision
Compare those stated features and included items with the current on-page offer and the exact quantity needed. No performance claim is added beyond the source product record.
Complete source-backed product details
| Manufacturer | Vegajf Electronics |
|---|---|
| Brand | Mem Retain |
| Item Weight | 1.58 ounces |
| Product Dimensions | 8 x 5.5 x 0.5 inches |
| Item model number | 9v-001 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 9v-001 |
- For maintaining voltage continuity to the engine computer, clock, and radio memory when the vehicle battery is disconnected
- Includes instructions for perfect results
- Works on all vehicles with an OBD ll port(1996 or newer)
- Better results than 12v cigarette outlet models due to standardized OBD ll wiring (not all 12v outlets are wired up the same, some require key on for example)
- A voltage-blocking diode installed for safe use prevents vehicle 12 volts from damaging the 9-volt battery. Power can only flow out of the battery not in.
Detailed Instructions Included
Assembled in the USA
Source product highlights
About this item
- Assembled in the USA
- Much more reliable than with similar 12v/Cigarette outlet models
- For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected
- Instructions are included for perfect results——- Uses 9 volt battery (Not Included)
- Exclusive Safe voltage blocking diode installed for safe 9 volt battery
Horrible sd card does read –
Didn’t come with instructions.
MM –
Keeps radio settings Do not know how much data to ECU . Is it on ? no light!
jeffrey l. –
Easy to use and kept the memory while I changed the battery. Make sure you look at your OBD connector before you buy because it it’s in a tight location, the item might not work as the cord is located on the end of the connector. It barely fit my car with some wrangling which would not have been a problem if the wire entered the connector on the back/middle.
Eric Guisinger –
This product works, and does it well. I have, and still have, some reservations about using it on a hybrid vehicle as their electronics have significant differences from standard ICE autos. NOTE: This device applies a voltage to the vehicle systems via the OBD interface. This may (probably will) result in circuits that are, or potentially might be, hot – resulting in a dead short if that hot circuit were to become grounded. I seriously recommend isolating your battery leads once you’ve removed them from the battery. I have used electrical tape for this, but it tends to leave a gummy residue. My most recent choice was a putting the leads inside insulating gloves, which worked really well.
Chuck –
If I could add another star, I would! I was extremely surprised and impressed with this little thing! Before using it, I was skeptical whether this thing would really work. I have a 2017 Dodge Ram. Everything on it is electrical, lots of bells and whistles. Clocks, radio stations, seat adjust memory, dash memory etc. etc. I really didn’t want to lose programming on all of that stuff. It is a real pain to set it all back up. I followed the instructions, but not completely. Before removing my truck’s battery, I plugged the device in with a 9v battery as instructed. I didn’t, however, remove all bulbs that come on. The inside bulbs turn off with a delay, after you close the doors. There is a bulb, or LED under the hood, but I didn’t remove that either. I removed the truck battery and closed the hood to shut down the light. I went down and bought a new battery but was gone for over 2 hours. Instructions say, you chance losing power and programming after two hours. When I got home, I opened the hood and the bulb didn’t light at all. I was pretty concerned and so I wired up the new battery as quick as possible. The hood bulb lit brightly. I opened the door and the interior lights came on. I removed the 9v battery and the device and started my truck. It fired up right away. I checked the radio, seat, dash and everything. None of my settings were lost!! All of the truck’s memory was intact! I couldn’t believe it!! This little thing is absolutely great and I would highly recommended it to anyone!
R. Christensen –
Perfect solution for maintaining all the settings in my suv when replacing the battery. Easy to use, with the caution that a 9 volt battery won’t hold the settings for long, so have everything ready to go to replace the automotive battery as fast as possible.
Mona H. –
Works great, like the portability of 9 volt and not lugging an extra car battery. Held car memory for 15-20 minutes while I changed battery.
Ziggy –
I used this during the replacement of the battery in my vehicle. It worked perfectly. It saved all of my radio presets and data needed to pass emissions tests. Make sure that you use a new/good 9 volt battery.
Dennis Welch –
Keep in mind your positive cable will still be hot with a small amount of volts when using this, recommend covering it to avoid grounding issues.
mario 1 –
bon
Desert Dweller –
This is what I had in mind for a vehicle memory preserving device! It is simple to use, just follow the exact instructions. I had to use it twice today (once to swap out my old battery, and one more time when I got it home and cleaned the terminals. Instead of having to hassle with another 12 volt power source (like a car or solar generator), I was able to keep my radio and clock settings with just a 9-volt battery plugged into the car OBDII port through this device for a combined total of ~45 mins on the fresh 9V battery I used (the instructions say you should expect about 2 hours max per 9 volt battery). Build quality appears good, doesn’t feel flimsy. If you plan on changing out your car battery in the future, I recommend this time-saving device!