Description
Practical value and everyday use
ECCPP 4PCS 2.5 inch hubcentric Wheel Spacers 5 Lug 5×4.75 to 5×4.75 fits for Chevrolet Corvette 1984-2019 for GMC Jimmy 1991-2005 for Chevrolet Blazer 1987-2005 is listed in Wheel Adapters & Spacers. For a practical buying decision, start with this source-backed point: 3) Purchase a set of shorter studs and replace them with the factory studs.
The source also records: If your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation. Use this additional stated detail to judge day-to-day usefulness and package value: [PARAMETER]:this Wheel Spacers 5×4.75 to 5×4.75 with Thickness:2.5 inch| Vehicle Bolt Pattern:5×4.75| Wheel Bolt Pattern:5×4.75| Thread Pitch:12×1.5| Hub Bore:70.5mm | Recommended Install Torque:70-80 Ft/Lbs| Package Include:4 pcs Wheel Spacers with Thread locker glue.For imaginebroward.org Secondary Packaging,if you only receive 2pcs, please email us and we will reissue the rest for you.
Value-focused decision
Compare those stated features and included items with the current on-page offer and the exact quantity needed. No performance claim is added beyond the source product record.
Complete source-backed product details
Product Description
-
-
Check hub bore
-
-
fitments
- 1988-2005 for Blazer 1967-2001 for Camaro
- 1980-1989 for Caprice 1964-1972 for Chevelle
- 1962-1965 for Chevy II 1984-2019 for Corvette
- 1959-1970 for Impala 1982-2004 for S10
- 1983-1994 for S10 Blazer 1996-2002 for Jimmy
fit for
This spacer adapter includes open end lug nuts to secure the spacers onto your factory hubs
If your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
1) Shorten the factory studs
2) The wheels need to have the open slots (cavities) between mounting holes.
3) Purchase a set of shorter studs and replace them with the factory studs.
Source product highlights
- [GARAGE CHECKING]:For this 2.5 inch Wheel Spacers 5×4.75,please verify the bolt count,bolt circle diameter,center bore,and bolt size match your vehicle before ordering.Enter your Year/Make/Model in system garage filter(imaginebroward.org CONFIRMED FIT)to validate product fitment
- [PARAMETER]:this Wheel Spacers 5×4.75 to 5×4.75 with Thickness:2.5 inch| Vehicle Bolt Pattern:5×4.75| Wheel Bolt Pattern:5×4.75| Thread Pitch:12×1.5| Hub Bore:70.5mm | Recommended Install Torque:70-80 Ft/Lbs| Package Include:4 pcs Wheel Spacers with Thread locker glue.For imaginebroward.org Secondary Packaging,if you only receive 2pcs, please email us and we will reissue the rest for you
- [PERFORMANCE]:(1)Increasing the extra gap between tire and vehicle hub assembly,improving the vehicle’s performance in terms of handling and traction ,such as improve flexibility when turning.(2)Giving an aggressive performance to your vehicle.(3)Lowering the center of gravity,benefit for keeping stability at a h-igh speed.(4) Av-oid rubbing on the sway bar when install larger tires
- [INSTALLATION]:Please Make sure that your Vehicle hub bolts size MUST equal to this Wheel Spacers’thread pitch 12×1.5.Requires standard tire repair tools, a torque wrench, and lug socket.Check and re-torque all hardware, including open-end lug nuts securing adapter to wheel hub after some 50-100 miles
- [LUG BOLTS DESIGN]:While 12.9’s are stronger but less ductile which is an issue in a failure scenario. Pre-installed heat treated 10.9 grade studs are more appropriate in the sense that they have higher plastic strain energy, or in simpleton terms: will tend to deform rather than snap.10.9’s are more than sufficient for a car application in terms of strength and for the reasons mentioned above are more desirable than 12.9’s
Ron –
I bought this set of 4 spacers for my 1987 Chevy s10 (2wd/rwd) so I could fit camaro wheels on. If you plan on doing the same I would recommend also ordering new extended wheel studs at the same time. There’s a set on Amazon for 10 wheels studs at around $40. Now as for the spacers, they do exactly what they’re supposed to! It’s a bit tougher getting them to go on flush to your hub. I recommend using a wire brush on a drill and some 60 grit sandpaper and take a nice thin layer off of your hub. Even after sanding down both the front and rear hubs, these spacers were just barely squeezing on. Which in my opinion is a good thing. After finally getting them on, I torqued down my lug nuts and then put my wheels right on. Perfect fit and quality is a solid 7/10. (Although the ad says these spacers will NOT fit the front of your Chevy s10 (2wd) they 100% do fit, and they only put that on here to avoid liability issues. Overall a great spacer, and gets the job done!
Robert Miller –
Quality looking aluminum. Quality looking machining quality looking hardware. No complaints. Got these to mount some corvette salad shooters on my Sonoma.
Jamie B –
Needed a lil space, worked great.
Gary Jensen –
Excellent product torqued to factory specifications and everything worked good
Freddy martinez –
Excelente 👌 quedo perfecto
wayne –
Only gave 1 star because it wouldn’t let me give a 0 rating !!! Don’t waste your time or money, they don’t fit. Don’t fit wheel hub properly or the wheel. Totally useless hunks of aluminum.