Description
Practical value and everyday use
7/8′ to 1′ Crank Shaft Adapter Stainless Steel Crank Shaft Sleeve(w/2pcs Key) fit for Gas Engine Pulley Crank Shaft Predator Pulley is listed in Crankshaft Pulleys. For a practical buying decision, start with this source-backed point: The crank shaft sleeve is constructed with durable metal and upgraded design which can extend service life of gas engine crank shafts.
The source also records: Category: Replacement Parts / Engines & Engine Parts / Engine Parts / Crankshaft Pulleys. Use this additional stated detail to judge day-to-day usefulness and package value: Crank Shaft Adapter Pulley kit is made of Stainless Steel 304.
Value-focused decision
Compare those stated features and included items with the current on-page offer and the exact quantity needed. No performance claim is added beyond the source product record.
Complete source-backed product details
- Product Dimensions
:
1 x 1 x 1 inches; 3.53 ounces - Date First Available
:
November 13, 2024 - Manufacturer
:
Swilpool - ASIN
:
B0DMV6R5XF - Country of Origin
:
China
The Sleeve outside diameter is 1.02”;the Sleeve length is about 3” .
Crank Shaft Adapter Pulley kit is made of Stainless Steel 304.
Universal design, fit for most engine.
The crank shaft sleeve is constructed with durable metal and upgraded design which can extend service life of gas engine crank shafts.
Works with Engine Crank Shafts to enlarge the crank diameter and increase the shaft size to fit pulleys, gearboxes, etc. DIY install a Shaft Sleeve Adapter kit will help reduce the necessity of buying a new motor or pulley, to maintain existing components and speed/power requirements.
Olin Christian –
Wasn’t t want it said it was.
Marcelo G. –
Good quality metal sleeve, had to work the key a little to make it fit but it works fine.
C –
As long as you were looking to adapt a 7/8 shaft to a one inch shaft you are in the right place. Depending on the application, you might need to beat it a little bit to get it in, but it will fit.I don’t know who needs to hear this, but you cannot adapt a three quarter inch shaft to a one inch shaft with a 7/8 to 1 inch adapter. I typically use these to adapt a brake kit I like to use. This worked perfectly fine for that.
OLE HACKER –
After installing the sleeve on the shaft it was too big to fit into the blade adapter. Had to machine down the OD of the sleeve at least .025 to get it to fit. Also key was too thick had to machine it down as well. A lot of extra work.