Description
Practical value and everyday use
intake Hose Fit Subaru 2002-2007 WRX 2004-2014 STI Forester EJ20 EJ25 Turbo charger is listed in Hoses & Hose Clamps. For a practical buying decision, start with this source-backed point: Category: Replacement Parts / Engines & Engine Parts / Engine Parts / Turbocharger & Supercharger Parts / Intercooler Parts / Hoses & Hose Clamps.
The source also records: Direct Bolt-On to EJ20/EJ20T Engines For High Temperature and High Boost Application. 4-Ply Nylon for Strong Reinforcement 4mm Thickness Withstands Operating Temperatures from -65F to 350F Degrees Fahrenheit Working pressure 80 PSI Burst pressure 285 PSI. Use this additional stated detail to judge day-to-day usefulness and package value: Product identity: intake Hose Fit Subaru 2002-2007 WRX 2004-2014 STI Forester EJ20 EJ25 Turbo charger.
Value-focused decision
Compare those stated features and included items with the current on-page offer and the exact quantity needed. No performance claim is added beyond the source product record.
Complete source-backed product details
Direct Bolt-On to EJ20/EJ20T Engines For High Temperature and High Boost Application. 4-Ply Nylon for Strong Reinforcement 4mm Thickness Withstands Operating Temperatures from -65F to 350F Degrees Fahrenheit Working pressure 80 PSI Burst pressure 285 PSI
Source product highlights
About this item
- DUE TO COVID-19, imaginebroward.org PRIME SERVICE MIGHT BE DELAY OR UNAVAILABLE. IF YOU SEE ITEM IS UNAVAILABLE, PLEASE CALL (626)308-2996 FOR DIRECT SHIP OUT.
- Brand new turbo charger intake hose
- Intake hose compatible with Subaru 2002-2007 WRX STI Forester EJ20 EJ25 Intake silicone hose
- High quality silicone turbo charger intake hose
Eugene Tascott –
Replaced oem. Fit.
Derrick –
Required me to do some adjustments to make it fit properly but nothing major and it looks and works great. Obviously won’t be Perrin fit but for the price well worth it
Durablecardboard –
This was installed on a 2005 WRX STi. This inlet hose is well built, but has some flaws. It does require trimming, and the metal ring for the s-pipe from the air box did not fit on my stock hardware. I had to modify it to get it to fit. Some of the fittings are poorly placed, like the line that goes in front of the intake manifold and behind the power steering hard line is too far back and hits the intake manifold. The top line by the turbo inlet is also too at back and hits the intake manifold. Trimming the rear of the pipe would only make the figment worse, so I’ll cross my fingers and hope it doesn’t rub through any time soon. This was an absolute pain to install. Took about 6 hours to do without pulling the intake manifold. If I ever do it again, I’ll pull the intake manifold. This was not fun.
Lori B. –
I definitely had to do some trimming to make the hose fit with my cold air intake, nothing major. I wish I had done so before installation. It took some work to make some of the hoses connect, but eventually, everything fit okay. Since the hose is made of silicone, I was able to flex it into place which was helpful because I didn’t completely remove the intake, just loosened it and raised it. If you’re on a budget and have some patience, this part is a sufficient replacement.
alfredo jarillo –
Need creativity to make it fit. Those who complained about not fitting, suck at being mechanics lol. Installed it on an 04 WRX. Just have new evap hoses and clamps to ease off the install
Customer –
Cold air intake required with this hose.
Evan P Olson –
The ended didn’t fit on the airbox without MacGyvering it and other ends need to be trimmed to fit. I feel like this shouldn’t be necessary. Manufacturer to fit the first time.