Description
Practical value and everyday use
Universal Transmission Holding Fixture Including Base for 375 400 425 475 is listed in Transmission Mounts. For a practical buying decision, start with this source-backed point: The universal transmission holding fixture makes it easy to tear down by allowing free use of your hands.
The source also records: Category: Replacement Parts / Transmission & Drive Train / Transmission Mounts. Use this additional stated detail to judge day-to-day usefulness and package value: Dual Tightening Handle Design: Allows work comfort at any angle and easy access to valve body.
Value-focused decision
Compare those stated features and included items with the current on-page offer and the exact quantity needed. No performance claim is added beyond the source product record.
Complete source-backed product details
Product Description
Universal Transmission Holding Fixture
- Bench Mounts with base
- Allow 360° swings
- Dual tighten handles
- Lifting ring provids for easy use
- Please check your transmission model before purchasing
- Allows work comfort at any angle and easy access to valve body
- The universal transmission holding fixture makes it easy to tear down by allowing free use of your hands
Source product highlights
- Compatible Tansmissions: 180C (3L30), 200, 200C, 200-4R, 250, 250-C, 350, 350-C, 375, 400 (3L80), 425, 475 (3L80-HD), 700-R4 (4L60) (4L60E) 4L80E, J-8763-B
- Support Tansmissions: Makes it easy to tear down by allowing free use of your hands when it supports the transmission because of the mounting lugs on a variety of transmissions
- Dual Tightening Handle Design: Allows work comfort at any angle and easy access to valve body
- 360° Swing: Dual tighten handles, Allow 360° swings
- Customer Supports: We offer lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Please feel free to contact us if you have any questions
Jason Martinez –
Held up good while doing a refresh on my 4l80e
Jake A. –
Works well, mounts well but the shaft diameters between the mount & fixtures have a lot of clearance so it’s not the most confidence inspiring/quality fit – but I could just have it mounted backwards and making it worse than it should be. I might print or cut a little pvc sleeve so everything fits in a quality manner.
K. Bracy –
Works great
Tradesman2000 –
The table mounted tube could be a better fit. The cotther pins instead of handles are a bit basic. The threaded rods could have ends similar to those on C clamps to be easier on the transmission case. But, for the price it is a good investment.
Will –
Happy to report this worked with a Ford AOD. I had to buy a longer bolt for the center pin – the included all thread was too short. It’s M16x2 thread. I welded the base to my engine stand and have the trans mounted up now. It’s not as easy to spin as a motor due to the imbalance and lack of a handle, but I got it upside down and ready for teardown without too much fuss.
RPegram –
Works great. Holds a transmission securely.
Customer –
It’s made a good quality it does what it’s supposed to do. The only thing I didn’t like was the cotter pins that are holding the threaded bolt they could’ve used some kind of handle
Tim –
It holds the transmission. Not much else to say.